Tygon ND-100-80透明細管，可用于動脈及靜脈輸液，廣泛應用于醫院及實驗室。軟而富有彈性，同一條管可以與不同規格的針頭相連接；同時，材質又有足夠的剛性，確保不會爆裂。無毒、無熱原，生物相容性符合USP Class VI標準?？筛邏簃ie菌、EtO、輻照或化學方法mie菌。

典型應用：靜脈或動脈輸注

增塑劑：TOTM

Tygon ND-100-80管訂貨信息：

型號	內徑		外徑		壁厚		管長 Feet
	Inches	mm	Inches	mm	Inches	mm
AAD04091	0.01	0.25	0.03	0.76	0.01	0.25	500
AAD04103	0.02	0.51	0.06	1.52	0.02	0.51	500
AAD04119	0.03	0.76	0.09	2.29	0.03	0.76	500
AAD04127	0.04	1.02	0.07	1.78	0.015	0.38	500
AAD04133	0.05	1.27	0.09	2.29	0.02	0.51	500

廣州市賽拓儀器科技有限公司代理經銷圣戈班軟管，tygon管，Versilon管型號齊全，大部分型號有現貨，發貨地為廣州，訂購前請?jiān)敿?xì)溝通使用場景、貨期、售價等信息。

TYGON R ND 10O-80, one of the medical industry's leading Non-DEHP tubing offerings, has been specifically formulated in a higherdurometer that makes it possible to produce smaller diameter tubings with a high resistance to kinking and collapse.

Characteristics

TYGONR ND 100-80 is available exclusively to medical device manufacturers in fiveextremely small sizes for use in their medical devices used in intravenous or intra-arterial infusion, and other surgical and hospital applications.It is rigid enough foreasy handling, yet soft enough to reduce problems with puncturing.

Since TYGONR ND 100-80 is thermoplastic in nature, it can be fabricated into

cannulas or protective sheath products using thermoforming and flaring techniques.

Based upon a unique chemistry developed by Saint-Gobain, TYGON' ND Series tubingwas formulated to be meet the requirements of Regulation(EC)1907/2006 on theRegistration, Evaluation, Authorization and Restriction of Chemicals(REACH)andRegulation(EU)2017/745 on medical devices(EU MDR) of not containing anyreportable substances or chemicals of concern.Every individual compound lot is tested to ensure DEHP levels are <1000 ppm. During the extrusion process, individualproduct dimensions are maintained and monitored through in-line micrometers andoff-line verification with computerized imaging equipment.

Consistent with many medical tubing market requirements,ND 100-80 material canbe effectively bonded/welded using the following methods: heat, electronic(RF)/ultrasonic, solvent and adhesive. Factors to be considered when selecting thecomponents include:security of the bond required, effect on the integrity of thematerials to be joined, and presence of residues or extractables that may affectbiocompatibility.When bonding procedures are not used, mechanical clamps arerecommended to provide secure attachment.

Biocompatibility

TYGONRND 10O-80 is made from a biocompatible, non-DEHP polymer material developed specifically for medical device needs.The product meets the requirementof the USP<88>, Plastic Class Vl criteria. lt has extremely good blood interactioncharacteristics, very low extractable in soapy water and refluxed water. This is rarefor a plasticized PVC as usually there will be an increase in extraction in one of thosemediums. lt is animal derivative free and also lead stabilizer free.